MSDS

Bayer Environmental Science
Material Safety Data Sheet
MSDS Number: 102000011911
BAYER ADVANCED COMPLETE BRAND INSECT KILLER
FOR SOIL & TURF READY-TO-SPREAD GRANULES
MSDS Version 1.0
Page 3 of 7
Personal Precautions
Keep unauthorized people away. Isolate hazard area. Avoid contact with spilled
product or contaminated surfaces.
Methods for Cleaning Up
Avoid dust formation. Sweep up or vacuum up spillage and collect in suitable
container for disposal. Clean contaminated floors and objects thoroughly,
observing environmental regulations.
Additional Advice
Use personal protective equipment. Do not allow material to enter streams,
sewers, or other waterways.
SECTION 7. HANDLING AND STORAGE
Handling Procedures
Food utensils such as teaspoons or measuring cups must not be used for food
purposes after use in measuring pesticides.
Storing Procedures
Keep tightly closed in a dry, cool and well-ventilated place. Store in original
container and out of the reach of children, preferably in a locked storage area.
SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
General Protection
There are no known hazards associated with this product when used according
to the label directions. At the same time, the following guidelines should be used.
Avoid breathing dust. Avoid contact with skin and eyes.
Wash hands thoroughly with soap and water after handling and before eating,
drinking, chewing gum, using tobacco, or using the toilet.
Do not allow children or pets on treated areas until granules have been watered
into the soil and the grass or soil is dry.
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance
light brown
Physical State
granular
pH
6.7 (5 %)
Bulk Density
40 - 60 lb./cu.ft.
SECTION 10. STABILITY AND REACTIVITY
Chemical Stability
Stable under recommended storage conditions.