SDS

5. FIRE FIGHTING MEASURES (Continued)
---------------------------------------
SPECIAL FIRE FIGHTING PROCEDURES: Keep out of smoke. Cool exposed containers
with water spray. Fight fire from upwind position. Use self-contained
breathing equipment. Contain runoff by diking to prevent entry into sewers
or waterways. Equipment or materials involved in pesticide fires may
become contaminated.
-------------------------------------------------------------------------------
6. ACCIDENTAL RELEASE MEASURES:
-------------------------------------------------------------------------------
SPILL OR LEAK PROCEDURES..........: Isolate area. Avoid breathing dusts and
skin contact. Use recommended protective equipment while carefully
sweeping up and place in covered container for re-use if possible. Scrub
contaminated area with soap and water. Repeat and rinse with water.
Prevent contamination of streams, sewers, or other waterways.
-------------------------------------------------------------------------------
7. HANDLING AND STORAGE:
-------------------------------------------------------------------------------
STORAGE TEMPERATURE(MIN/MAX): 0 F/30 day average not to exceed 100 F
SHELF LIFE..................: Time/temperature dependent. Contact Bayer for
additional information.
SPECIAL SENSITIVITY.........: Extreme heat; moisture
HANDLING/STORAGE PRECAUTIONS: Do not allow product to contaminate material
which is intended for use or consumption by humans or animals.
-------------------------------------------------------------------------------
8. PERSONAL PROTECTION:
-------------------------------------------------------------------------------
REQUIRED WORK/HYGIENE PROCEDURES...: Exposure during the labeled use of this
product is expected to be minimal. Consumers should refer to the packaging
label for proper handling procedures. However, if exposure to this product
is possible while handling large quantities such as in subsequent
manufacturing, transportation spills or other emergencies, the following
personal protection is recommended.
EYE PROTECTION REQUIREMENTS........: Goggles should be used when needed to
prevent dust from getting into the eyes.
SKIN PROTECTION REQUIREMENTS.......: Avoid skin contact. Wear long sleeves and
trousers and use chemical-resistant gloves such as nitrile.
VENTILATION REQUIREMENTS...........: Control airborne concentrations through
the use of general and local exhaust ventilation where needed.
RESPIRATOR REQUIREMENTS............: Under normal handling conditions no
respiratory protection is needed. However, if needed to prevent
respiratory irritation, a NIOSH-approved particulate respirator may be
used.
ADDITIONAL PROTECTIVE MEASURES.....: Clean water and soap should be available
Product Code: 41741 MSDS Page 4
Approval date: 11/07/2001 Continued on next page