Instruction manual

6
Cascade A Out Connector
Provides an attachment point for connecting this unit to
another unit via the cascade cable. A cascade return cable
from another unit’s Cascade A Out connector to this unit’s
Cascade A In connector completes the stack connection
(see the example shown in Figure 4).
Unit Select Switch
The Unit Select switch (up = Base) determines the base
unit for the stack configuration (see “Base Unit” on
page 8). The Unit Select switch status is displayed on the
switch’s LED display panel (see your switch’s User Guide
for details). When in the Base (up) position, all other Unit
Select switches in the stack configuration must be set to
Off (down).
Cascade A In Connector
Provides an attachment point for accepting a cascade cable
connection from an adjacent unit in the stack. A cascade
return cable from this unit’s Cascade A Out connector to
the adjacent unit’s Cascade A In connector completes the
stack connection (see the example shown in Figure 4).
Note:
For stacking three or more units, order the
optional 1 meter (3.28 ft) or 3 meter (9.84 ft) cascade
return cable (Figure 2).