Instruction manual

5
If any items are missing or damaged, contact the sales
agent or the customer service representative from whom
you purchased the BayStack 400-ST1 cascade module.
You will need a Phillips screwdriver for the installation.
BayStack 400-ST1 Front Panel Components
The front panel components of the BayStack 400-ST1
Cascade Module are shown in Figure 3. Component
descriptions follow the figure.
Figure 3. Front Panel Components
Note:
Unless otherwise specified, the terms “switch”
and “unit” are used interchangeably in this guide.
Cascade A Out
Cascade A In
Unit Select
Base
1 = Blank connectors (unused)
2 = Cascade A Out connector
3 = Unit Select switch
4 = Cascade A In connector
3
BS0031A
4
1
2