Instruction manual

39
Upgrading the Switch Firmware
Your switch firmware provides a code load facility that
allows you to upgrade the firmware image over any switch
port, including any MDA ports.
Accessing the Firmware Images
You can obtain the firmware image files and the latest
updates to your product documentation, including release
notes, by visiting the Nortel Networks Web site at the
following location:
www.support.baynetworks.com/software
Follow the instructions provided in the Web page to obtain
the firmware image files and release notes. The release
notes provide instructions for accessing the firmware
image.
Note:
The BayStack 400-ST1 Cascade Module
will
not operate
with BayStack 450 switches that are
configured with BayStack 450 software versions
earlier than
version V1.1.0. You must upgrade the
switches to BayStack 450 software version V1.1.0 (or
later)
before you install
the BayStack 400-ST1
Cascade Modules.