Instruction manual

25
b. Connect the other end of the cascade cable to
the Cascade A In connector on the unit just
below the base unit (unit 2), or just above the
base unit if cascading up the stack.
c. Continue attaching the cascade cables until
the last unit is configured.
A maximum of eight units can be configured per
stack.
d. At the last unit in the stack, connect one end of
a cascade return cable to the Cascade A Out
connector. Connect the other end of the
cascade return cable to the Cascade A In
connector on the base unit.
8. Make sure all cable connections to the cascade
connectors are secured firmly by the thumb screws
on the cascade cable plugs.
Note:
For stacking three or more units, order the
optional 1 meter (3.28 ft) or 3 meter (9.84 ft) cascade
return cable (Figure 2).