Instruction manual

Installation

This section describes how to connect up to eight switches

into a redundant stack. The stack can consist of any

combination of supported switch models.

Before installing your equipment, review the previous

sections of this guide.

This section includes the following topics:

• Installing the 400-ST1 Cascade Module

• Installing and connecting multiple switches

• Connecting power

• Verifying the installation

After verifying the installation as described on page 27 of

this guide, refer to your switch’s User Guide to set up the

stack and customize the stack configuration according to

your system requirements.

Note:

For stacking three or more units, order the

optional 1 meter (3.28 ft) or 3 meter (9.84 ft) cascade

return cable (Figure 2).