Specifications

7
Figure 3
Power Controller Configuration Menu:
To select the configuration menu, type ‘config’ at the prompt.
NOTE: If the unit display with the following message, “Configuration mode in use” A
user in the other port is in the “Configuration” menu.
Figure 4
Manage User
The User Menu allows the admin user to add and delete users, change passwords, and change the
outlet list that displays a user’s access to prescribed outlets. Select “Manage Users,” from the
configuration menu and the following menu appears if the unit has been reset or initial setup:
Figure 5
NOTE: User in position (1) will be the ‘admin user’ for the outlets. Older units will not
display the ‘delete’ option until a user is added.
-------------------------------------------
| User | Assigned Outlets |
| | 1| 2| 3| 4| 5| 6| 7| 8|
-------------------------------------------
-------------------------------------------
A)...Add User
D)...Delete User
R)...Rename User
G)...Change Outlet Group
Enter user number to assign Outlets, A, D, G or R.
Enter Request:
RPC>config
Unit ID: RPC3ADE-20
1)...Manage Users Add/Delete/Rename, assign outlets
2)...Change Outlet Name Select an outlet to change its name
3)...Enable/Disable Confirmation Confirmation (Y/N)
4)...Enable/Disable Status Menu Opening status of outlets
5)...Change Unit ID As written
6)...Change Alarm Threshold As written
X)...Exit
RPC>password
Enter new Password: *****
Re-Enter new Password: *****
Type Help for a list of commands
RPC>