Specifications

6
Figure 1
Help Menu: Type Help followed by a <CR> to view the line commands for the RPC’s.
Figure 2
Password setting: Once you have logged out and log back in as a user or as the administrator, you
can then set the password to gain access. Type “Password”<cr>
Unit ID: RPC3ADE-20
-------------------------------------------------------------------------------
| Outlet | True RMS | Peak RMS | True RMS | Average | Volt- |
| Group | Current | Current | Voltage | Power | Amps |
-------------------------------------------------------------------------------
| Outlet 1-8 | 0.2 Amps | 0.2 Amps | 120.7 Volts | 23 Watts | 23 VA |
-------------------------------------------------------------------------------
Internal Temperature: 73.4 F Ext: 68.2 F
Switch 1: Open 2: Open
1)...Outlet 1 : On
2)...Outlet 2 : On
3)...Outlet 3 : On
4)...Outlet 4 : On
5)...Outlet 5 : On
6)...Outlet 6 : On
7)...Outlet 7 : On
8)...Outlet 8 : On
Type Help for a list of commands
RPC>
RPC>help
On n <cr> --Turn on an Outlet, n=0,1...20,all
Off n <cr> --Turn off an Outlet, n=0,1...20,all
Reboot n <cr> --Reboot an Outlet, n=0,1...20,all
Status <cr> --RPC-28 Status
Config <cr> --Enter configuration mode
Lock n <cr> --Locks Outlet(s) state, n=0,1...20,all
Unlock n <cr> --Unlock Outlet(s) state, n=0,1...20,all
Current <cr> --Display True RMS Current
Voltage <cr> --Display True RMS Voltage
Power <cr> --Display Average Power
Clear <cr> --Reset the maximum detected current
Temp <cr> --Read current temperature
Logout <cr> --Logoff
Logoff <cr> --Logoff
Exit <cr> --Logoff
Password <cr> --Changes the current user password
Whoami <cr> --Displays the current user name
Unitid <cr> --Displays the unit ID
Type Help for a list of commands
Enter Request: