User`s guide

FLAMINGOS at the MMT

/usr/local/flamingos/flamingos.hea

ders.lut/Flamingos.fitsheader -file /data0/mmtguest/Test/test -index 2"

If it hangs here for more than ~6 seconds, type ufdc -q status in

another flmn-2m-1b window

ufdc> greeting: UFGemMCE4Agent -- accepted client: ufdc@flmn-2m-1b@2002:

350:03:40:49.170980

2002:350:03:40:49.170980

2002:350:03:40:50.440745ufdc@flmn-2m-1b

START

GATIR *Flamingos Beta* 2.00_f.07 >>

>>>>>.....TAKING AN IMAGE OR APPLYING LUT.....

(Exposure time + number of reads = 3 + 1)

Have slept 3 seconds out of an exposure time of 4 seconds

If you do not see the START command and the exposure time counter above, then MCE4 has crashed.

The statement in the output above that saying to type ufdc -q status is a red herring, doing so will

not change anything.

Solution: Reboot MCE4 and reinitialize it with initflam.pl. To reboot MCE4 telnet to baytech from

flamingos1b with userid mce4pow and password 16Mb,img. Type reboot 1, and wait for the prompt

to return. Then type logout. Example output from this procedure follows:

mmtguest@flamingos1b{2001}telnet baytech

Trying 140.252.53.86...

Connected to baytech.

Escape character is '^]'.

RPC-3 Telnet Host

Bay Technical Associates

Unit ID: flamingos1b

Enter username>mce4pow

Enter password>16Mb,img

Option(s) installed:

True RMS Current

Internal Temperature

True RMS current: 1.6 Amps

Maximum Detected: 1.7 Amps

Internal Temperature: 18.5 C

Circuit Breaker: On

Selection Outlet Outlet Power

Number Name Number Status

1 mce4 4 On

Type "Help" for a list of commands

RPC-3>reboot 1

17/23