Owner`s manual

RPC SERIES OWNER’S MANUAL
INTRODUCTION TO THE RPC SERIES
________________________________________________________________________________
1
INTRODUCTION TO THE REMOTE
POWER CONTROL SWITCH (RPC)
The BayTech RPC-Series is a full-featured AC power management
solution that provides an easy way to control power of remote equipment.
From your office or from anywhere, the RPC will TURN ON, TURN
OFF, OR REBOOT remote equipment.
There are nine different RPC models; four models operate at 115 VAC,
15 Amps; three models operate at 115VAC, 20 amps; and two models
operate at 230 VAC, 10 Amps.
115 VAC, 50/60 Hz, 15 Amp
RPC-2: Six receptacles and an EIA-232 connection.
RPC-2 MD01: Six receptacles, EIA-232 connection, and a
2400 bps Modem.
RPC3-15: Eight receptacles, Ethernet and EIA-232
connections.
RPC-5: Four receptacles (15 amps per receptacle),
Ethernet and EIA-232 connections.
115 VAC, 50/60 Hz, 20 Amp
RPC3-20: Eight receptacles, Ethernet, and EIA-232
connections.
RPC-4: Eight receptacles, and an EIA-232
connection.
RPC5-20 Four receptacles (15 amps per receptacle),
Ethernet and EIA-232 connections.
RPC-7: Twelve receptacles, Ethernet and EIA-232
connections.
RPC-21: Twelve receptacles, Ethernet and EIA-232
connections.