Owner`s manual

RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
52
Outlet Status Display From the Outlet Operation Configuration
Menu, select #1, “Outlet Status Display.”
Depending on whether outlet status display
is currently enabled or disabled, the RPC
responds with the option to change the
current status. Default setting is enabled:
Disable Outlet Status Display? (Y/N)
Command Confirmation When a command is sent to turn on, turn off,
or reboot a receptacle, the enable/disable
confirmation feature responds by asking you
to confirm the command. For example, if
the command ON 3 is sent, the
enable/disable confirmation responds:
Turn On Outlet 3? (Y/N)
If the enable/disable feature is disabled, the
RPC will not ask to confirm the command.
From the Outlet Operation Configuration
Menu, select #2, “Command Confirmation.”
Depending on current status, the RPC
responds with the option to change the
setting. Default setting is enabled:
Disable Confirmation? (Y/N)
Current Alarm Level The Current Alarm Level allows the user to
set the level of current required to sound the
internal alarm. This setting is only available
on units with current monitoring circuitry.
From the Outlet Operation Configuration
Menu, select #3, “Current Alarm Level.”
Enter the alarm point. Default setting is
16.0 amps.