Owner`s manual

RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
37
RPC-3, RPC-3A, RPC-5, AND RPC-7
NOTE: The RPC-3, RPC-3A, RPC-5 and RPC-7 are configured in
a similar manner. The RPC-5 has 4 outlets and supports 4 users.
The RPC-3/3A have 8 outlets and support 8 users. The RPC-7 has
12 outlets and supports 12 users. These differences are minor and
not specifically addressed unless significant to the topic of
discussion. The term “RPC Series”, as used in this section, will
include the RPC-3, 3A, 5, and 7
IMPORTANT: “IN” #1 supplies power to the logic of the RPC-5.
This inlet must have power for the unit to operate.
The RPC Series are multi-user units,
supporting one admin user and up to twelve
outlet users. The admin user has access to
all outlets, user and system configuration
options, unit status, and unit reset
capabilities. The outlet user has access to
only those outlets in the user’s outlet list, as
set by the admin user. The outlet user’s
menu and status display shows only those
outlets available to the user.
NOTE: The RPC Series supports one admin user. The admin
user may have four sessions running concurrently. Default user
name is admin. User names are case sensitive.
NOTE: Each session has an inactivity timeout of ten minutes.
After ten minutes of no activity elapses, the session terminates.