Owner`s manual

RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
27
Enable/Disable When a command is sent to TURN ON,
Confirmation TURN OFF, OR REBOOT a receptacle, if
the enable/disable confirmation feature is
enabled, the RPC responds, asking you to
confirm the command. For example, if the
command “ON 3” is sent, and the
enable/disable confirmation is enabled, the
RPC responds:
Turn On Outlet 3? (Y/N)
If the enable/disable feature is disabled, the
RPC will not ask to confirm the command.
From the configuration menu, select #3,
“Enable/Disable Confirmation.”
Depending on the current status of the
switch, the RPC responds with the option to
change the current status. Default is
Enabled.
Disable Confirmation? (Y/N)
Enable/Disable From the configuration menu, select #4,
Status Menu “Enable/Disable Status Menu.” If the
Enable/Disable Status Menu feature is
enabled, the following status menu appears.
Default setting is Enabled.
Circuit Breaker: On
1) Outlet 1 : Off
2) Outlet 2 : Off
3) Outlet 3 : Off
4) Outlet 4 : Off
5) Outlet 5 : Off
6) Outlet 6 : Off
RPC-2A >
If the Enable/Disable Status Menu feature is
disabled, only the RPC-2A > prompt
appears.