Owner`s manual

RPC SERIES OWNER’S MANUAL
DETAILED OPERATION AND CONFIGURATION
________________________________________________________________________________
24
a password (other than a carriage return) is
set, the RPC requires password entry before
allowing the user to operate the RPC unit.
REMEMBER, the password feature is
case sensitive.
Default outlet names are Outlet 1, Outlet
2, Outlet 3 . . . Outlet 6. From the RPC’s
configuration menu, the user can change any
outlet name to outline a unique set-up.
From the status menu’s RPC > prompt, type
CONFIG. The following menu appears for
the RPC-2:
RPC > CONFIG
1) . . . Change Password
2) . . . Change Outlet Name
Enter Request:
This menu for the RPC-2A:
1) . . . Change Password
2) . . . Change Outlet Name
3) . . . Enable/Disable Confirmation
4) . . . Enable/Disable Status Menu
X) . . . Exit
Enter Request:
Or this menu for the RPC-4:
RPC-4 > CONFIG
1) . . . Change Password
6) . . . Change Outlet Name
7) . . . Enable/Disable Confirmation
8) . . . Enable/Disable Status Menu
9) . . . Change Unit ID
X) . . . Exit
Enter Request: