Owner`s manual

RPC SERIES OWNER’S MANUAL

RPC SERIES QUICK START (RPC3-15/20, RPC-3A, RPC-5, RPC-7 AND RPC-21)

________________________________________________________________________________

RPC-3 Telnet Host

Bay Technical Associates

Unit ID: RPC3

RPC-3 Menu:

1) . . . Outlet Control

2) . . . Manage Users

3) . . . Configuration

4) . . . Unit Status

5) . . . Reset Unit

6) . . . Logout

Enter Selection:

If the main menu fails to appear, ensure the

correct cables and adapters are being used

and that they are connected properly. Also,

verify the serial communication

parameters are correctly configured.

Outlet Control From the RPC> prompt, enter one of the

following commands: ON n, OFF n,

REBOOT where “n” is the outlet number

you want to command. Entering an outlet

number of “0” sends the command to all

outlets. Type “MENU” to return to the

main menu. . Reboot only works on outlets

which are in the “ON” condition.

Manage Users New users (a maximum of 4 for the RPC-5,

8 for the RPC-3/3A and 12 for the RPC-7)

may be added or deleted using this menu.

Any time there is more than 1 user besides

the admin, a “Delete user” function will

appear. Any time the maximum number of

users is reached, the “Add user” function

will disappear. Deletion of the admin user

is prohibited.