Owner`s manual

RPC SERIES OWNER’S MANUAL
RPC SERIES QUICK START (RPC-2 MD01)
________________________________________________________________________________
6
RPC-2 MD01 QUICK START
Local access Using the 9FRJ45PC-1 adapter and the
using EIA-232 serial RJ08X007 (8-pin crossed) cable, connect the
connection serial port of your computer to the RJ-45
port labeled “EIA-232.”
Load serial port communications software.
Set serial communications parameters to
9600 bps, 8 data bits, 1 stop bit, and no
parity.
Remote access Using the RJ04X007 (RJ-11) modular cable,
using modem connect either port labeled “LINE” on the
connection RPC unit to the telco wall jack. Proceed to
“Accessing Main Menu via Modem.”
Using the RJ04X007 (RJ-11) modular cable,
connect either port labeled “LINE” on the
RPC unit to the telco wall jack. Using
another RJ04X007 (RJ-11) modular cable,
connect the remaining port labeled “LINE”
on the RPC unit to the port labeled “LINE”
on the external modem.
Using the 25MRJ45MD-8 adapter and the
RJ08X007 (8-pin crossed) cable, connect the
DB-25 female port of the modem to the
RJ-45 port labeled “EIA-232” on the back of
the RPC unit.