Owner`s manual

RPC SERIES OWNER’S MANUAL

RPC SERIES QUICK START (RPC-2, RPC-2A, AND RPC-4)

________________________________________________________________________________

Or for the RPC-4:

RPC-4 > CONFIG

1) . . . Change Password

2) . . . Change Outlet Name

3) . . . Enable/Disable Confirmation

4) . . . Enable/Disable Status Menu

5) . . . Change Unit ID

X) . . . Exit

Enter Request:

Change Password Default password is <cr>. The maximum

field length is 8 alphanumeric characters.

The password feature is case sensitive.

Change Outlet Name Default Outlet Names are Outlet 1, Outlet

2, … The maximum field length is 10

alphanumeric characters.

Enable/Disable Default setting is enabled. This setting

Confirmation prompts the user for a Yes or No when

making changes.

Enable/Disable Default setting is enabled. This setting

Status Menu toggles the menu on and off.

Change Unit Default setting is RPC-4. This setting

ID (RPC-4) allows the user to name the specific unit.

The maximum field length is 16 characters.