Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE CONFIGURATION
____________________________________________________________________________
84
Enter Selection:
Type "1" to enable the selected relay event or "2" to disable the selected relay event.
DELETE EVENTS/SCHEDULE
Type “4” (in the relay operating setup menu) and <cr> to delete events or schedules.
The module will respond:
DELETE EVENTS
Enter Event Number (1-12, 0=ALL)<cr>, or X to exit:
Type the Event Number you wish to delete or "0" for the entire schedule followed by
<cr>.
REPORTING SETUP
Type “3” (in the configuration menu) and <cr> to display the reporting setup menu.
The module will respond:
REPORTING SETUP
Reporting Method 1
Report Start Time 2
Report Interval 3
Host Address 4
Time Tag 5
Terminating Character(s 6
Exit X
Enter Selection:
REPORTING METHOD
Type “1” (in the reporting setup menu) and <cr> to change the reporting method. The
module will respond:
SELECT REPORTING METHOD
Reporting Method COMMAND
Command 1
Immediate (When Event Occurs) 2
Schedule 3
Exit X
Enter Selection: