Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE CONFIGURATION
____________________________________________________________________________
82
Press any key to EXIT
Press any key to return to the Relay Operating Setup menu.
CREATE/MODIFY SCHEDULE
Type “2” (in the relay operating setup menu) and <cr> to create or modify the current
schedule. The module will respond:
EVENT NUMBER
Enter Event Number (1-12) <cr>, or X to EXIT:
Type the desired Event Number (1 to 12) followed by <cr>. The V78 CRM-1 will
respond with the Event Start Time menu. The Event Start Time consists of the day of
the week and time of day the initial occurrence of the selected relay event will
happen.
The CRM-1 will respond with:
EVENT START TIME
Event Start Time..................SU 00:00:00
Current Date04/28/00, Day-of-Week and Time.MM/DD/YY D HH:MM:SS
Enter Day-of-Week (0=Any, 1=SUN, 2=MON....7=SAT)<cr>, or X to EXIT:
Type the desired day of the week for the initial relay event (1 to 7) or 0 for any day
followed by <cr>. For example if you enter "1" for Monday, the V78 CRM-1 will
respond with:
Enter Hours (0-23)<cr>, or X to EXIT:
Type the desired hour for the initial relay event followed by <cr>. For example, if
you enter "14" for 2:00pm, the CRM-1 will respond with:
Enter Minutes (0-59)<cr>, or X to EXIT:
Type the desired minute of the selected hour for the initial relay event followed by
<cr>. For example, type "0" to start at the top of the selected hour. After you have
entered in the desired Event Start Time, the V78 CRM-1 will respond with the Event
Duration menu which allows you to program how long the selected relay will stay
energized once the Event Start Time elapses. The Event Start Time may be
programmed in hours and minutes or in milliseconds. The V78 CRM-1 will respond
with: