Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE CONFIGURATION
____________________________________________________________________________
81
Host Address 1:1,1
Data Format HEX
Time Tagging DISABLED
Terminating Character(s 0D0A
Dynamic Configuration DISABLED
Press a key to continue or X to Exit.
RELAY OPERATING SETUP
Type “2” (in the configuration main menu) and <cr> to display the relay operating
setup menu. The module will respond:
RELAY OPERATING SETUP
List Current Schedule 1
Create/Modify Schedule 2
Enable/Disable Events 3
Delete Events/Schedule 4
Exit X
Enter Selection:
LIST CURRENT SCHEDULE
Type “1” (in the relay operating setup menu) and <cr> to list the current schedule.
The module will respond:
CURRENT SCHEDULE
EVENT START DURATION INTERVAL RELAY
NO. TIME NO.
DD HH:MM:SS HH:MM D HH:MM:SS
NN:NN
01 00:00:00 00:00 0 00:00:00 0
02 00:00:00 00:00 0 00:00:00 0
03 00:00:00 00:00 0 00:00:00 0
04 00:00:00 00:00 0 00:00:00 0
05 00:00:00 00:00 0 00:00:00 0
06 00:00:00 00:00 0 00:00:00 0
07 00:00:00 00:00 0 00:00:00 0
08 00:00:00 00:00 0 00:00:00 0
09 00:00:00 00:00 0 00:00:00 0
10 00:00:00 00:00 0 00:00:00 0
11 00:00:00 00:00 0 00:00:00 0
12 00:00:00 00:00 0 00:00:00 0