Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE CONFIGURATION
____________________________________________________________________________
79
where n = 1 to 3. 1 = Command, 2 = Immediate and 3 = Schedule.
SINGLE ENDED OR DIFFERENTIAL COMMAND
The Single Ended or Differential (SD) command programs the V77 ADM-1 to use
single ended or differential inputs. The Single Ended or Differential command has
the following format:
SDn<cr>
where n = 1 or 2. 1 = single ended and 2 = differential.
TIME TAG COMMAND
The Time Tag (TT) command is used to enable or disable time tagging. The Time
Tag command has the following format:
TTn
where n = 1 or 2. 1 = enable and 2 = disable.
UNIPOLAR/BIPOLAR COMMAND
The Unipolar/Bipolar command programs the V77 ADM-1 channel inputs for
unipolar or bipolar operation. The Unipolar/Bipolar command has the following
format:
UBn<cr>
where n = 1 or 2. 1 = unipolar and 2 = bipolar.
VOLTAGE RANGE COMMAND
The Voltage Range command is used to program the desired operating voltage range
of the V77 ADM-1 channel inputs. The Voltage Range command has the following
format:
VRn<cr>
where n = 1 to 5. 1 = -10 to +10V (with JP1 installed), 2 = -5 to +5V (or 0 to +10V),
3 = -2.5 to +2.5V (or 0 to +5V), 4 = -1.25 to +1.25V (or 0 to +2.5V), and 5 = -0.625
to +0.625V (or 0 to +1.25V).