Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE CONFIGURATION
____________________________________________________________________________
73
DATA FORMAT
Type “5” and <cr> to enter the Data Format menu. The V77 ADM-1 will respond:
SELECT DATA FORMAT
Data Format HEX
Hexadecimal 1
Decimal 2
Engineering Units 3
Exit X
Enter Selection:
Type the number corresponding to the desired choice. The "Data Format" sub-menu
provides a choice in the format of the sampled data contained in each data message.
Data can be reported in Hexadecimal, Decimal, or in Engineering Units (volts).
TIME TAG
Type “6” and <cr> to enter the Time Tag menu. The V77 ADM-1 will respond:
ENABLE / DISABLE TIME TAGGING
Time Tagging DISABLED
Enable 1
Disable 2
Exit X
Enter Selection:
With time tag enabled, a MM/DD/YY HH/MM/SS entry is appended to all samples,
where MM is the month, DD is the day, YY is the year, HH is the hour, MM is the
minute, and SS is the second according to the base unit's time-of-day clock.
TERMINATING CHARACTER(S)
Type “7” and <cr> to enter the Termnating Character(s) menu. The V77 ADM-1 will
respond:
ENTER TERMINATING CHARACTER
Terminating Character(s) 0D0A
Enter 1 or 2 Terminating Characters in Hex Format
(i.e. 0D0A for CR+LF) <cr>, or X to Exit: