Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE CONFIGURATION
____________________________________________________________________________
59
Time Tag Mode 8
Connect Port ID Echo 9
Port EIA Driver A
Exit X
Enter Request :
You can make whatever changes are necessary by responding to the above menu.
The Exit function returns you to Operations Mode.
SERIAL PORT CONFIGURATION
Type “2” (in the configuration main menu) and <cr> to change the serial port
configuration. The module will respond:
Enter Serial Port Number (? = Help, ENTER = Exit) :?
Type the port number of the selected module that you wish to reconfigure followed by
<cr>. If you wish to review the status of the selected module, type "?". For example,
if you enter "4", the module responds with the current status for Port 4 and a list of
available options as follows:
Current Module 2 Serial Port Configuration :
Xon / XoffPort Device
Name
Baud
Rate
Word
Size
Stop
Bits
Parity
Xmit Recv
4 Device D 9600 8 1 None Off Off
Exit/Save 1 Set Stop Bits 4
Set Baud Rate 2 Set Parity 5
Set Word Size 3 Set Xon/Xoff 6
Enter Request:
You can now reconfigure Port 4 by selecting the appropriate option from the menu (1
to 6). For example, to change the baud rate to 115.2K baud, send "2" (set baud rate).
The module will respond with this menu:
1 For 300
2 For 600
3 For 1200
4 For 2400
5 For 4800
6 For 9600
7 For 19200
8 For 38400
9 For 76.8K
A For 115.2K