Owner`s manual

M SERIES DAC

BASE UNIT AND MODULE CONFIGURATION

____________________________________________________________________________

Typing any key results in the M Series base unit and all installed modules resetting.

STATUS

Type “1” (in the configuration main menu) and <cr> to display the module status. The

module will respond:

Current Terminate Character is 0DH

Current Host Designation is Module 1

Current Mode of Operation is 1

Strike any Key to Continue, or X to Exit

Current Module 2 Serial Port Configuration :

Xon/ XoffDevice

Name

Baud

Rate

Word

Size

Stop

Bits

Parity

Xmit Recv

Device A 9600 8 1 None Off Off

Device B 9600 8 1 None Off Off

Device C 9600 8 1 None Off Off

Device D 9600 8 1 None Off Off

Strike any Key to Continue, or X to Exit

Current Module 2 Port I.D :

Port Port I

1 01:02,1

2 01:02,2

3 01:02,3

01:02,4

Strike any Key to Continue, or X to Exit

Model V73/V74/V76 etc. High Speed Serial 4C

Revision F. X.XX

Unit: 1, Module: 2

Status 1

Serial Port Configuration 2

Port Device Name 3

Port I.D 4

Designate Host Port location 5

Message Terminate Character 6

Mode of Operation 7