Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE CONFIGURATION
____________________________________________________________________________
56
Connections in use: 0
Pending messages (module #s): none
Immediate Mode User: none
Command/Configuration Mode User: Module 0
System up time (days:hh:mm:ss): 0:02:05:29
<Strike any key to continue.>
INTERNAL BUS STATUS
Type “2” (in the status and diagnostics menu) and <cr> to display the internal bus
status. The module will respond:
Internal Bus Status:
Internal Bus Errors: 0
Bus transmit data channel: clear
<Strike any key to continue.>
NETWORK STATUS
Type “3” (in the status and diagnostics menu) and <cr> to display the network status.
The module will respond:
Network Status:
Medium status: good
Medium faults: 0
Xmit bufr errs: 0
Available send buffers: 30
Receive queue status: open
<Strike any key to continue.>
LOGGED USERS
Type “4” (in the status and diagnostics menu) and <cr> to display the active users.
The module will respond:
Active Users:
Address/Port Internal TX/RX Net Data Flo TX/RX Bus Data Flo
TX/RX
Module 0 C 0,1/0,1 ok/ok
<Strike "T" to terminate a session, any other key to continue.>