Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE CONFIGURATION
____________________________________________________________________________
54
Accept password as typed above? (Y/N) :
Press "Y" to accept the new password or "N" to reject it. If you press "N", the V72 will
return to the "Enter Password" prompt. If you type "Y", the V72 will return to the main
configuration menu.
NOTE: It is not necessary to reset the unit for this option to take effect.
USER INTERFACE
Type “6” (in the configuration main menu) and <cr> to move through the following
options:
User interface options, press <CR> to skip option.
Enable/Disable Module ID Message? (E/D):
Press “E” to enable the Module ID Message, press “D” to disable the ID Message or
press <cr> to leave the option unchanged. The default is “enabled”.
Enable/Disable Login? (E/D):
Press "E" to enable the Login Procedure, press "D" to disable the Login Password
Procedure or press <cr> to leave this option unchanged. The default is “enabled
NOTE: It is not necessary to reset the unit for this option to take effect.
Enable/Disable Immediate Msg Quick Release? (E/D):
Press "E" to enable the Immediate Mode Message Quick Release Procedure, press "D"
to disable this procedure, returning the module to normal message handling mode or
press <cr> to leave this option unchanged. The default is “disabled”.
Enable/Disable strip LF/NUL after CR? (E/D):
Press "E" to make the V72’s Telnet processor to strip line feeds or nulls which follow
carriage returns, press “D” to allow the characters to pass through or press <cr> to
leave this option unchanged. The default is “disabled”.
Enable menu interface? (E/D):
Press “E” to enable the Menu interface mode of operation for the V72, press “D” to
disable the Menu interface mode of operation for the V72, or press <cr> to leave this
option unchanged The default is “enabled”. If the menu is enabled the following
prompt appears:
Enter menu attention Character: