Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE CONFIGURATION
____________________________________________________________________________
50
D for 38400
E for 57600
F for 76800
G for 115.2K
Enter Request :
Send "G" for 115.2K baud rate, and the V71 will respond with the reconfigured status
of the port, the option menu, and the prompt:
Xon / XoffPort Baud
Rate
Word
Size
Stop
Bits
Parity
Xmit
Recv
Line
Interface
1 115200 8 1 None Off Off EIA-232
Exit/Save 1 Set Stop Bits 4 Set Line Interface 7
Set Baud Rate 2 Set Parity 5
Set Word Size 3 Set XON/XOFF 6
Enter Request :
You can now select other options from the menu. For example, to change the line
interface to EIA-422, type "7" (Set Line Interface) and the V71 will respond with:
1 for EIA-232
2 for EIA-422
3 for 20mA Current Loop
Enter Request :
Type "2" for EIA-422 line interface and the V71 will respond with the reconfigured
status of the port, the option menu, and the prompt:
Xon / XoffPort Baud
Rate
Word
Size
Stop
Bits
Parity
Xmit
Recv
Line
Interface
1 115200 8 1 None Off Off EIA-422
Exit/Save 1 Set Stop Bits 4 Set Line Interface 7
Set Baud Rate 2 Set Parity 5
Set Word Size 3 Set XON/XOFF 6
Enter Request :
If there are no other changes, send "1" (Exit/Save) and the V71 will return to the main
configuration menu.
NOTE: The new serial port configuration changes do not take effect until
after you exit configuration mode.