Owner`s manual

M SERIES DAC
CABLING
____________________________________________________________________________
39
Figure 1: PC, PS/2 Computer/Terminal Adapter
BayTech Part No. 9FRJ45PC-3
Figure 2 shows the required adapter for a PC or terminal with a DB-25 connector.
Use a crossed RJ-45 cable to connect these adapters to the EIA-232 port.
Figure 2: PC, PS/2 Computer/Terminal Adapter
BayTech Part No. 25FRJ45PC-3
IMPORTANT: When modular connectors are used as shown in Figures 1 - 2
above with RJ-45 connectors, crossed RJ-45 cables are required. See the cable
diagram that follows.
MODEM CONNECTION
Connect the phone line to the RJ-11 connector on the V93A with a RJ-11 cable.