Owner`s manual

M SERIES DAC
CABLING
____________________________________________________________________________
38
Relay #2 NC 6
13 Relay #4 Wiper
Relay #2 Wiper 5
12 Relay #4 NO
Relay #2 NO 4
11 Relay #3 NC
Relay #1 NC 3
10 Relay #3 Wiper
Relay #1 Wiper 2
9 Relay #3 NO
Relay #1 NO 1
Figure 3: Relay Connections (DA-15M): Relay Connections (DA-15M)
V93A
The V93A modem has two modular connectors for device selection and
configuration. One connector is for connection to a dial-up line. The other connector
is used to communicate with an EIA-232 port.
EIA-232 CONNECTION
Connect the eight pin modular cable(RJ-45) to the port labeled EIA-232 on the V93A.
Connect the DB9 adapter to the serial port of your PC or terminal and then connect
the other end of the cable to the RJ-45 side of the adapter. Use adapter BayTech part
number 9FRJ45PC-3 and cable, BayTech part number RJ08X007 that come with the
RPC.
Figure 1 shows the required adapter for a PC with a DB-25 connector. Use a crossed
RJ-45 cable to connect these adapters to the EIA-232 port.
BLUE
ORANGE
BLACK
RED
GREEN
YELLOW
BROWN
GRAY
1
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
TX
RX
RTS
CTS
DSR
GND
DCD
DTR
FEMALE
DE-9
RJ-45