Owner`s manual

M SERIES DAC
CABLING
____________________________________________________________________________
34
V84 ADR-1/1A CABLING
The ADR-1 and ADR-1A are installed in the M Series chassis as described in Section
4.5 of the base unit operator's manual.
NOTE: The ADR-1 and ADR-1A cannot be installed as Module 1. Also, if
an ADR-1(A) is removed from a module slot and a different ADR-1(A) is
installed in that location, the newly installed module acquires the previous
module's configuration. Moving an ADR-1(A) to a different module
location requires reconfiguration because the configuration parameters are
stored as a function of slot location and module type. The configuration
information does not stay with a relocated module.
Figure 2: ECM-1 Board and GATE/OUT Jumpers