Owner`s manual

M SERIES DAC

CABLING

____________________________________________________________________________

Ground 1 14 Ground 1

10 & 22

Ground 2 15 Channel 16 2

9 & 21

Channel 8 3 16 Channel 15 3

8 & 20

Channel 7 4 17 Channel 14 4

7 & 19

Channel 6 5 18 Channel 13 5

6 & 18

Channel 5 6 19 Channel 12 6

5 & 17

Channel 4 7 20 Channel 11 7

4 & 16

Channel 3 8 21 Channel 10 8

3 & 15

Channel 2 9 22 Channel 9

+ -

Channel 1 10 23 Ground

Polarity

Ground 11 24 Ground

Ground 12 25 Ground

Ground 13

Single-ended Input Connection Differential Input Connections

IMPORTANT: If you are connecting multiple single-ended devices, it is

imperative all the grounds returns are at the same potential or erroneous

operation could result. If a channel is not connected to an external circuit, it

should be terminated to ground or programmed as inactive (see Section

5.1.5.4). This prevents the presentation or reporting of erroneous data from

unused inputs.

V78 Pinout

The V78 CRM-1 is installed in the M Series chassis as described in the installation

section of this manual.

NOTE: The V78 CRM-1 cannot be installed as Module 1. If a V78 CRM-1

is removed from a module slot and a different V78 CRM-1 is installed in that

location, the newly installed module acquires the previous module's

configuration. Moving an V78 CRM-1 to a different module location

requires reconfiguration because the configuration parameters are stored as a

function of slot location and module type. The configuration information

does not stay with a relocated module.