Owner`s manual

M SERIES DAC
ABOUT THIS OWNER’S MANUAL
___________________________________________________________________________
iii
ABOUT THIS OWNER’S MANUAL
This document provides information required for installing and operating your Bay
Tech equipment. It should allow the user to connect, power up, and access an
applications menu where peripheral equipment can be controlled. We recommend
reading this manual carefully, while placing special emphasis on correct cabling and
configuration. If you have any problems with your installation, please contact a
BayTech Applications Engineer at 228-467-8231, call toll free from anywhere in the
United States using
1-800-523-2702 or contact us at our Web Site, www.baytechdcd.com.
BayTech manufactures many remote site management products, data switches, data
collection multiplexers, remote power controllers, and peripheral print sharers. If you
would like information on any of these products, please contact BayTech Customer
Service at the numbers previously listed.
Conventions used in this manual include:
CAUTION: This term is used to denote any condition that could possibly
result in physical harm to personnel or damage to equipment.
IMPORTANT: This term is used to denote conditions that could result in
the loss of communications or to highlight the proper functioning of
equipment.
NOTE: This term is used to denote items of interest to the user.
<cr>: Carriage Return or ENTER
The information in this document is subject to change without notice. The statements,
configurations, technical data, and recommendations in this document are believed to
be accurate and reliable, but are presented without express or implied warranty. Users
must take full responsibility for their applications of any products specified in this
document. The information in this document is proprietary to Bay Technical
Associates, Inc.
In the interest of improving internal design, operational function, and/or reliability,
Bay Technical Associates, Inc reserves the right to make changes to the products
described in this document without notice.
Bay Technical Associates, Inc does not assume any liability that may occur due to the
use or application of the product(s) or circuit layout(s) described herein.
This manual replaces BayTech Publication U140E111-02 and includes information
from the following Bay Tech publications: