Owner`s manual

M SERIES DAC
TECHNICAL SUPPORT
____________________________________________________________________________
207
V79 PDI-1 & V80 PDI-2 COMMAND SUMMARY
Command Description
CBc<cr> (c=Ch# 1 to 16, 0=all) Clear Event Buffer. Clear all buffered event samples.
CCc<cr> (c=Ch# 1 to 16, 0=all) Clear Event Counter(s)
CRc<cr> (c=Ch# 1 to 16, 0=all) Clear Event Latch Data
RAc<cr> (c=Ch# 1 to 16, 0=all) Report All Buffered Events
RCc<cr> (c=Ch# 1 to 16, 0=all) Report Event Counter(s)
RDc<cr> (c=Ch# 1 to 16, 0=all) Report Event Duration(s)
RLc<cr> (c=Ch# 1 to 16, 0=all) Report Event Latch Data
ROc<cr> (c=Ch# 1 to 16, 0=all) Report Event Counter and Reset
RRc<cr> (c=Ch# 1 to 16, 0=all) Report Event Latch Data
RS c<cr> (c=Ch# 1 to 16, 0=all) Report Single Buffered Event (first in, first out)
SAc<cr> (c=Ch# 1 to 16, 0=all)
Read and report the current state of the selected
input(s).
SLc<cr> (c=Ch# 1 to 16, 0=all) Report Latest Event
* Multiple channels are selected using 4 formats.
Examples: SA1,2,3,4,5,6,7,8<cr>, SA1-8<cr>, SA0<cr>, SA1,2,4-8<cr>
V79 PDI-1 & V80 PDI-2 DYNAMIC CONFIGURATION
COMMAND SUMMARY
Command Description
DBn<cr> (n=0-65535ms) Debounce Delay
DFn<cr> (n=1 or 2) Data Format. 1=Hexadecimal and 2=Decimal.
RMn<cr> (n=1 to 3) Reporting Method. 1=Command, 2=Immediate, and
3=Schedule.
TTn<cr> (n=1 or 2) Time Tag. 1=Enable and 2=Disable.