Owner`s manual

M SERIES DAC
TECHNICAL SUPPORT
____________________________________________________________________________
197
Gain ranges: 0.5 (jumper selectable), 1, 2, 4, 8
(software selectable)
System noise: <1.5 LSB rms (all gains)
Overvoltage Protection: ±50 V without damage, power "on" 35 V
without
damage, power "off"
Common-Mode Input Voltage: ±13 volts (max)
Common-Mode Rejection Ratio: 95 db @60 Hz, all gains
ACCURACY
Relative accuracy: ±1.5 LSB maximum
(nonlinearity + quantization error)±1.0
LSB typical
Differential nonlinearity: ±1.0 LSB maximum (no missing codes over
temperature range)
Integral nonlinearity: ±1.0 LSB maximum (no missing codes
over temperature range)
Full Scale (FS) Error: ±0.2% maximum (gain = 1) ±0.03%
typical
Offset error: ±3 LSB maximum, ±1 LSB typical
Internal Voltage Reference: 0.05 % (of 5V) maximum 0.002% (of
5V) typical
Self Calibration: 3 points (25%, 50%, & 75%) on -5 to +5 V range.
Auto offset calibration on all ranges
Sample Rates: 1 to 4000 S/s
Sample Averaging: 1 to 4000 samples
FIFO buffer: 12KB (stores up to 6000 averaged
samples w/o a
Time Tag or 1500 w/Time Tag, without
requiring