Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE OPERATION
____________________________________________________________________________
150
where, UU is the M Series Unit Number
MM is the V77 ADM-1 Module Number
CC is the V77 ADM-1 Channel Number
HHH is a Hex value ranging from 000 to FFF
DDDD is a Decimal value ranging from 0 to 4095
VV is an Engineering unit ranging from -10 to +10 volts
MM is the month (if Time Tag enabled)
DD is the day (if Time Tag enabled)
YY is the year (if Time Tag enabled)
HH is the hour (if Time Tag enabled)
MM is the minute (if Time Tag enabled)
SS is the second (if Time Tag enabled)
EXAMPLE: A complete data message from an V77 ADM-1 installed as Unit 1,
Module 15 with Channels 1-8 active using Hex Data Format and having Time Tag
enabled, would appear as follows:
1:15:1 7FE 11/18/93 09:12:22
1:15:2 7FA 11/18/93 09:12:22
1:15:3 8C3 11/18/93 09:12:22
1:15:4 CD4 11/18/93 09:12:22
1:15:5 568 11/18/93 09:12:22
1:15:6 04E 11/18/93 09:12:22
1:15:7 CBA 11/18/93 09:12:22
1:15:8 7D2 11/18/93 09:12:22
UNIT
MODULE
CHANNEL
DATA
DATE
TIME
Data messages requested through the use of Data Commands might include the
messages from one or more channels.
V78 OPERATION
GENERAL
The main feature of the V78 CRM-1 is eight (8) fully programmable,
electromechanical, form-C, single-pole-double-throw (SPDT) relays. Each relay has a