Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE OPERATION
____________________________________________________________________________
123
Logged Users 4
Exit X
> 3
Network Status:
Medium status: good
Medium faults: 0
Xmit bufr errs: 0
Available send buffers: 30
Receive queue status: open
<Strike any key to continue.>
LOGGED USERS
By responding to the Enter Request: message in the V72 Status & Diagnostics Menu
with “4” (Logged Users), you can review the Logged Users into the system. The V72
host module will respond with a menu that is similar to the following:
V72 Status & Diagnostics Menu.
System 1
Internal Communications 2
Network Interface 3
Logged Users 4
Exit X
> 4
Active Users:
Address/Port Internal TX/RX Net Data Flo TX/RX Bus Data Flo
TX/RX
1) *200.4.3.10 none/none ok/ok
no/ok
2) 200.4.3.10 2,3/2,3 ok/ok
ok/ok
The star (*) indicates that Active User #1 is currently communicating with the V72
Ethernet module. By responding to the “Strike ‘T’” message in the Logged Users
Menu with “T” (Terminate) you will see a screen that asks “Enter number of
connection to terminate”. See the screen that follows:
<Strike "T" to terminate a session, any other key to continue.> T