Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE OPERATION
____________________________________________________________________________
122
Pending messages (module #s): none
Immediate Mode User: none
Command/Configuration Mode User: none
System up time (days:hh:mm:ss): 2:07:43:54
<Strike any key to continue.>
INTERNAL COMMUNICATIONS
By responding to the Enter Request: message in the V72 Status & Diagnostics Menu
with “2” (Internal Communications), you can review the current internal
communications status. The V72 host module will respond with a menu that is similar to
the following:
V72 Status & Diagnostics Menu.
System 1
Internal Communications 2
Network Interface 3
Logged Users 4
Exit X
> 2
Internal Bus Status:
Internal Bus Errors: 0
Bus transmit data channel: clear
<Strike any key to continue.>
NETWORK INTERFACE
By responding to the Enter Request: message in the V72 Status & Diagnostics Menu
with “3” (Network Interface), you can review the current Network Interface status. The
V72 host module will respond with a menu that is similar to the following:
V72 Status & Diagnostics Menu.
System 1
Internal Communications 2
Network Interface 3