Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE CONFIGURATION
____________________________________________________________________________
103
If the Login Password is correct, type "N". The V93A will store the new Login
Password into non-volatile memory and return to the main configuration menu.
LOCAL MODEM SETUP
Type “8” (in the configuration main menu) and <cr> to change the local modem
setup. The module will respond:
Local Modem Setup:
Rings to Answer 1
Connectivity Time-out 2
Exit X
Enter Request :
Type the number corresponding to your desired choice. For example, if you type “1”
(Rings to Answer), the V93A will respond with:
Rings to Auto-Answer 1
Change It ? (Y/N) :
Type “Y” to change the Number Rings to Auto-Answer setting. The V93A will
respond:
Enter Number of Rings to Auto-Answer (1 to 4) :
The V93A will store the Number of Rings to Auto-Answer in non-volatile memory
and return to the main configuration menu.
By responding to the message in the Local Modem Setup menu with "2"
Connectivity Time-out The V93A will respond with:
Enter Request : 2
Modem Connectivity Time-out is 5 minutes
Change It ? (Y/N) :
This time-out can be programmed from 5 to 255 minutes, or 0 (=disable). The timer is
started when the modem goes off-hook (DCD goes high), and the modem will return
to “on hook” after the time-out has expired. The factory default is 0 (disabled).
EXIT
Type “X” (in the configuration main menu) and <cr> to exit the configuration menu.