Owner`s manual

M SERIES DAC

BASE UNIT AND MODULE CONFIGURATION

____________________________________________________________________________

102

ATTENTION CHARACTER

Type “5” (in the configuration main menu) and <cr> to change the attention character.

The module will respond:

Attention Character is ;

Change It ? (Y/N) :

Type "Y" to change the Attention Character. The V93A will respond with:

Enter Attention Character :

Type the desired Attention Character. For example, if you type "%", the V93A will

respond with

Attention Character is %

Change It ? (Y/N) :

Type "N" if no additional change is desired. The V93A will store the new Attention

Character into non-volatile memory and return to the main configuration menu.

DISCONNECT TIME GUARD

Type “6” (in the configuration main menu) and <cr> to enable or disable the

disconnect time guard. The module will respond:

Disconnect Time Guard10:28 AM is Enabled

Change It? (Y/N):N

Type "Y", to toggle the existing state of Disconnect Time Guard10:28 AM or "N" for no

change. The V93A will store the selected state of the Disconnect Time Guard into non-

volatile memory and return to the main configuration menu.

Type “7” (in the configuration main menu) and <cr> to change the password. The

module will respond:

Change It: (Y/N):

Type “Y” to enter the new password up to 8 ASCII characters followed by <cr>. For

example, if you what to change the Login Password to LOGIN, type "LOGIN" at the

prompt. The V93A will respond with:

Enter New Password ( 1 - 8 char., CR to end):