Owner`s manual

M SERIES DAC
BASE UNIT AND MODULE CONFIGURATION
____________________________________________________________________________
99
Local Modem Setup :
Rings to Auto-Answer 2
Modem Connectivity Time-out is Disabled
Login Setup:
Login Password is BTA
Strike any Key to Continue
Xon / XoffPort Device Name Baud
Rate
Word
Size
Stop
Bits
Parity
Xmit Recv
1 Host EIA-232 9600 8 1 None Off Off
2 Host MODEM 57.6K 8 1 None Off Off
Strike any Key to Continue
SERIAL PORT CONFIGURATION
Type “2” (in the configuration main menu) and <cr> to change the serial port
configuration. The module will respond:
Enter Host Device Number (1-2): 1
Module 1 Serial Port Configuration :
Xon / XoffPort Device Name Baud
Rate
Word
Size
Stop
Bits
Parity
Xmit Recv
1 Device A 9600 8 1 None Off Off
Exit/Save......1 Set Stop Bits.....4
Set Baud Rate..2 Set Parity........5
Set Word Size..3 Set Xon/Xoff......6
Enter Request :
You can now reconfigure the V93A EIA-232 port by sending the appropriate option (1 to
6) from the menu. For example, to change the baud rate to 115.2K, send "2" (Set Baud
Rate). The V93A will respond with:
1 For 300
2 For 600
3 For 1200
4 For 2400
5 For 4800
6 For 9600
7 For 19200
8 For 38400
9 For 57.6K
A For 76.8K
B For 115.2K
Enter Request :