Owner`s manual

RPC OWNER’S MANUAL

____________________________________________________________

Change Password Select #1, “Change Password,” press

<Enter.> NOTE The factory default

password is disabled by making the

password a carriage return. The RPC

prompts for the old password. Enter a

carriage return. The RPC prompts for a

new password. Enter a new password

(maximum field length, 8 characters). The

RPC asks you to confirm the new password.

A message confirms success of the password

change.

Change Outlet Name Select #2, Receptacle Names “Change

Outlet Name,” press <Enter.> Select the

outlet number, press <Enter.> Enter a new

receptacle name (maximum field length, 10

characters), press <Enter.> The new name

will show in the main menu for the

corresponding outlet.

REMOTE ACCESS

MODEM CONNECTIONS

RPC-2 MD01 Using the RJ04X007 (RJ-11) modular cable,

(Internal Modem) connect either port labeled “LINE” on the

RPC unit to the telco wall jack.

Proceed to “Accessing Main Menu via

Modem.”

RPC-2 RDR Plug the modem’s power supply into

(External Modem) receptacle number six on the RPC.