Owner`s manual

64
In the list below, “n” refers to selection number as displayed in Outlet
Status. Any invalid input results in an input error message and returns the
user to the command prompt.
From the RPC3> prompt in Outlet Control, type HELP. The RPC
responds with the following command summary information.
RPC3 >
“n” refers to selection number, as displayed in Outlet Status.
LOGOUT : terminate session
OFF n : turn off outlet “n”, do all for n = 0
ON n : turn on outlet “n”, do all for n = 0
REBOOT n : cycle power off/on outlet “n”, do all for n = 0
RC : display outlet relay control information
STATUS : display power status of outlets
HELP : display this message.
<Strike CR to continue.>
RPC OWNER’S MANUAL
____________________________________________________________
6.0 TECHNICAL SUPPORT
BayTech has a staff of applications engineers on duty to assist you from 7
am to 7 pm (CST or CDT), Monday through Friday. In the event you
have problems installing, setting up or operating your RPC unit, please
feel free to contact BayTech’s technical support office. For information
on all of BayTech’s data communication products, contact our Web Site at
the address given below.
If you call the BayTech support desk, please have the following
information available to help the applications engineers answer your
questions efficiently: