Owner`s manual

60
change the name of Receptacle 4 from Outlet 4 to Router
1, type Router 1 from the “Enter” prompt, followed by a
carriage return. The RPC responds with the outlet name
menu displaying the name change to Outlet 4:
1) . . . OUTLET 1
2) . . . OUTLET 2
3) . . . OUTLET 3
4) . . . Router 1
5) . . . OUTLET 5
6) . . . OUTLET 6
Enter Request:
To return to the configuration menu, hit any key at the
“Enter Request” prompt.
Display Outlet User
From the Outlet Operation Configuration Menu, select #5,
“Display Outlet User,” followed by a carriage return. The
RPC-3 or RPC-3A displays the outlet user assignments
similar to the following:
RPC OWNER’S MANUAL
____________________________________________________________
Outlet User Assignments
Outlet Outlet Assigned
Number Name User(s)
1 Outlet 1 admin, eng
2 Outlet 2 admin, sales
3 Outlet 3 admin, sales, eng
4 Outlet 4 admin, eng
5 Outlet 5 admin, eng
6 Outlet 6 admin, sales
7 Outlet 7 admin, sales, eng
8 Outlet 8 admin, eng
<Strike CR to continue>
5.3.6 UNIT STATUS
Unit status provides vital information about the RPC unit--system status,
network interface, logged user status, and outlet status. In the event of