Owner`s manual

RPC OWNER’S MANUAL

____________________________________________________________

Enable/Disable

Status Menu

RPC-2A From the configuration menu, select #4,

“Enable/Disable Status Menu.” The RPC

responds with the option to toggle the status

menu on or off.. NOTE The factory

default setting is Enabled:

Disable Status Menu? (Y/N)

2.2 RPC-2 MD01 AND RPC-2 RDR QUICK

START

LOCAL ACCESS

EIA-232 SERIAL Using the 9FRJ45PC-1 adapter and the

CONNECTION RJ08X007 (8-pin crossed) cable, connect the

serial port of your computer to the RJ-45

port labeled “EIA-232.”

Load serial port communications software.

Set serial communications parameters to

9600 bps, 8 data bits, 1 stop bit, and no

parity.

OPERATION

Accessing Main Menu Power on the RPC unit. Hit <Enter.> The

following status menu appears: