Owner`s manual

Enter the amount of time (seconds) to elapse before power

is applied to the outlet. The RPC-3 or RPC-3A resumes the

power-up delay status displaying the change.

NOTE Maximum number of seconds is 599.

Name Outlets

“Name Outlets” allows the user to customize outlet name(s)

to identify individual pieces of equipment attached to the

RPC. The factory default outlet names are Outlet 1,

Outlet 2, Outlet 3 . . . Outlet 8. From the RPC’s

configuration menu, the user can change any or all outlet

names to outline a unique set-up.

From the configuration menu, select #6, “Name Outlets.”

Select #4, “Change Outlet Name,” press <Enter.> The

RPC sends the following menu:

RPC-3 AND RPC-3A CONFIGURATION

____________________________________________________________

Enter number of outlet to name, CR to exit.

1) . . . OUTLET 1

2) . . . OUTLET 2

3) . . . OUTLET 3

4) . . . OUTLET 4

5) . . . OUTLET 5

6) . . . OUTLET 6

7) . . . OUTLET 7

8) . . . OUTLET 8

Enter Request:

Enter the number of the outlet you want to change. If you

want to change the name of Outlet 4, type the number 4 at

the “Enter Request” prompt, followed by a carriage return.

The RPC responds:

Enter:

Enter a new receptacle name (maximum field length, 10

characters), followed by a carriage return. If you want to