Owner`s manual

NOTE A null password for any particular user

disables the password login requirement for that user,

even if prompt for password is enabled.

Outlets From the configuration menu, select #6, “Outlets.” The

following Outlet Operation Configuration Menu appears:

Outlet Operation Configuration Menu

Enter Request, CR to exit

1) . . . Outlet Status Display: enabled

2) . . . Command Confirmation: enabled

3) . . . Outlet Power-up Delay

4) . . . Name Outlets

5) . . . Display Outlet Users

Enter Request >

RPC-3 AND RPC-3A CONFIGURATION

____________________________________________________________

Outlet Status Display

From the Outlet Operation Configuration Menu, select #1,

“Outlet Status Display.” Depending on whether outlet

status display is currently enabled or disabled, the RPC

responds with the option to change the current status.

NOTE The factory default setting is Enabled:

Disable Outlet Status Display? (Y/N)

Command Confirmation

Consider Option 1, "Outlet Control," from the RPC Main

Menu. The outlet control option allows control of each of

the RPC-3 or RPC-3A’s eight receptacles. When a

command is sent to TURN ON, TURN OFF, OR REBOOT

a receptacle, if the enable/disable confirmation feature is

enabled, the RPC responds asking you to confirm the

command. For example, if the command ON 3 is sent, and

the enable/disable confirmation is enabled, the RPC

responds:

Turn On Outlet 3? (Y/N)