Owner`s manual

Enter the RPC unit ID, followed by a carriage return. The

RPC resumes the configuration menu. NOTE: The

factory default Unit ID is RPC-3.

Access IMPORTANT If username and password are disabled

(factory default), outlet users will have access to all

admin functions.

and password login for both serial and network ports. If the

features are enabled, the RPC requires username and

password entry before allowing access to the unit.

RPC OWNER’S MANUAL

____________________________________________________________

To configure the login setup, select #5, “Access,” from the

configuration menu, followed by a carriage return <cr>.

The RPC-3 or RPC-3A responds with the following Login

Setup menu:

Toggle option by entering number, CR to exit

Network Access:

1) . . . Prompt for user name: disabled

2) . . . Prompt for password: disabled

Serial Port Access:

3) . . . Prompt for user name: disabled

4) . . . Prompt for password: disabled

Enter option >

Enter the number that corresponds to the prompt you want

to toggle. The unit responds by asking if you want to

enable the prompt, if it is currently disabled or disable the

prompt, if it is currently enabled. Type “Y” for “Yes,” or

“N” for “No,” accordingly.