Owner`s manual

55
Enter the Subnet Mask (Example: 255.255.255.0),
followed by a carriage return. Upon entry of a carriage
return, the RPC resumes the configuration menu.
NOTE: The factory default Subnet Mask is 0.0.0.0. If
you fail to enter the subnet mask in dotted decimal form,
the RPC responds again:
Enter Subnet Mask in dotted decimal form:
The RPC responds indefinitely with the same request
until the subnet mask is entered in the correct form.
RPC-3 AND RPC-3A CONFIGURATION
____________________________________________________________
Gateway The gateway address consists of four bytes, each byte
ranging from 0 to 255.
From the configuration menu, select #3, “Gateway.” The
RPC responds:
Enter Gateway address in dotted decimal form:
Enter the gateway address (Example: 200.4.5.50), followed
by a carriage return. Upon entry of a carriage return, the
RPC resumes the configuration menu. NOTE: The
factory default Gateway address is 0.0.0.0. If you fail to
enter the gateway address is dotted decimal form, the RPC
responds again:
Enter Gateway address in dotted decimal form:
The RPC responds indefinitely with the same request
until the gateway address is entered in the correct form.
Unit ID From the configuration menu, select #4, “Unit ID.” The
RPC responds:
Enter Unit ID (64 chars max):