Owner`s manual
53
return. The select #2, “Change Outlet List.” The RPC-3 or
RPC-3A responds:
To change outlet access, enter number(s) of outlets. If more than
one entry, separate numbers with commas. CR to exit.
User Name: engineering
Outlet Access
1) . . . Outlet 1 yes
2) . . . Outlet 2 no
3) . . . Outlet 3 yes
4) . . . Outlet 4 yes
5) . . . Outlet 5 no
6) . . . Outlet 6 yes
7) . . . Outlet 7 yes
8) . . . Outlet 8 no
RPC-3 AND RPC-3A CONFIGURATION
____________________________________________________________
To toggle outlet access, enter the number that corresponds
to the outlet you want to change. For example, if you want
engineering to have access to Outlet 2, enter the number 2,
followed by a carriage return. If you want engineering to
have access to Outlets 2, 5, and 8 enter the numbers 2, 5
and 8 separated by commas: 2,5,8
5.3.5 CONFIGURATION
Configuration can be performed through the serial port, as well as through
the network port, by the admin user only. From the RPC Main Menu,
select #3, “Configuration.” The following menu appears:
Bay Technical Associates
RPC-3 Configuration Menu
MAC Addr: 00.C0.48.05.53.A2
Unit ID: RPC3
Medium Stat: good
Active users: 1
Enter choice from menu, CR to exit
1) . . . IP Address : 0.0.0.0
2) . . . Subnet Mask : 0.0.0.0
3) . . . Gateway : 0.0.0.0
4) . . . Unit ID : RPC-3